How to remove the CapCut watermark from a video

CapCut has become a go-to video editor for creators on TikTok, Instagram, and YouTube because it’s free, powerful, and simple to use. Yet many users quickly notice a small but persistent problem: few exported videos carry a visible CapCut watermark or an automatic “default ending” clip, only when a CapCut template is used in the video. For casual edits that might not matter, but for professional work or personal branding, it can look unpolished.

‍

This watermark in a video exists for a reason. Like most free apps, CapCut includes subtle branding and default endings to promote its service and distinguish free exports from paid ones. The mark also helps identify template content where third-party elements might carry their own license requirements.

‍

In this guide, you’ll learn official, free ways to remove or avoid the watermark on both mobile and desktop. Whether you’re editing for a social media post or a professional project, the methods mentioned below will help you achieve natural results.

‍

How to remove the CapCut  watermark from the video

CapCut watermark is used to promote it and identify free exports, but there are many ways to remove it, depending on the watermark type. Below is a beginner-friendly guide that explains each method in a descriptive way.

‍

What is the significance of CapCut watermarks?

CapCut watermarks are mainly added for branding and to identify videos created with templates, rather than to protect intellectual property.

‍

However, there are times when you may want to remove a watermark from a video, for instance, if you’ve legally purchased the rights to the video or if you want to use the video for a personal project.

‍

Understanding CapCut  watermark types

Before you start editing, it’s important to know which watermark you’re dealing with, because the solution changes for each.

‍

1. Export watermark (Logo or Text)

This is the small ‘CapCut’ logo that appears in the corner of videos when you use pre-made templates or certain effects. It’s applied automatically during export in those cases, and will remain unless you edit around it.

‍

2. Default ending screen

CapCut adds a short outro clip—often just a few seconds long—at the end of every new project. This clip contains the CapCut logo and serves as subtle advertising. Fortunately, it can be disabled completely from the settings.

‍

3. Template or effect watermarks

Some already created templates include their own logos or text. These are different from CapCut ’s built-in watermark and have separate restrictions. Removing these requires permission from the owner.

‍

Official methods to remove the CapCut  watermark

CapCut provides legitimate options to export without a watermark.

‍

1. Subscribe to CapCut Pro

Upgrading to CapCut Pro unlocks premium templates, effects, stock resources, and cloud storage. It also ensures access to watermark-free premium assets. However, most basic exports are already watermark-free even on the free plan.

‍

2. Disable the “default ending”

Even free users can turn off the automatic outro.

‍

• Open CapCut and tap the Settings gear (mobile) or Preferences (desktop).

• Locate the Add default ending and toggle it off.

• Any new projects you create will no longer include that branded clip.

‍

3. Choose non-watermarked templates

Some templates are available in search browsers that are available without a watermark. When browsing templates, look for those without a “Watermark included” note. Using these ensures a clean export even on a free account.

‍

Free methods to remove the CapCut  watermark

If you prefer not to pay for Pro, you can still remove or hide the watermark with some creative editing:

‍

1. Crop the video

Adjust the frame to cut out the corner where the watermark appears with the help of an editing app like InShot, etc.

‍

2. Trim the ending

When the watermark is only on the final image, simply cut those seconds from your timeline before exporting.

‍

3. Overlay graphics, stickers, or masks

Add a custom logo, shape, or color block over the watermark. By matching colors or adding your own branding, you can hide the mark without reducing video resolution.

‍

4. Use free online removal tools (with caution)

Services such as WatermarkRemover.io can analyze the video and fill in the background where the watermark appears. 

‍

How to remove the CapCut watermark on mobile (iOS or Android)

1. Open your project

Launch the CapCut app and tap the project you want to export.

‍

2. Turn off the default ending

• Go to the main editing screen.

• Tap the gear-shaped Settings icon in the upper-right corner.

• Find the option Add default ending and switch it off. This prevents CapCut from adding its branded outro clip to all new projects.  

‍

3. Check the timeline for extra clips or overlays

Scroll through the video layers to make sure there isn’t a pre-loaded “CapCut” overlay from a template. Delete any unwanted layers.

‍

4. Upgrade if you want a completely clean export (optional)

If you see a small CapCut logo in the corner, it usually comes from a template or effect. Using CapCut Pro gives you access to premium templates/effects without watermarks, but standard exports are already watermark-free.

‍

5. Export the video

Tap Export in the upper-right corner, choose your resolution (1080p or 4K if available), and wait for rendering. The finished video saves directly to your device’s gallery.

‍

How to remove the CapCut watermark from a video on pc

Editing on a computer gives you a bigger workspace and more control than the mobile app, and CapCut’s desktop and browser versions make it easier to keep your footage clean. The steps below walk you through the built-in options first and then cover outside tools you can use when you need extra flexibility.

‍

CapCut desktop version features

CapCut’s PC edition—available for Windows, macOS, and as a browser editor at capCut.com—mirrors the core features of the mobile app but offers a wider timeline and more advanced export settings. You can drag and drop large files, fine-tune color or audio with greater precision, and export up to 4K without relying on a small touchscreen.

If you see a small CapCut logo in the corner, it usually comes from a template or effect. Using CapCut Pro gives you access to premium templates/effects without watermarks, but standard exports are already watermark-free.

‍

Differences from the mobile app in watermark removal

• The settings menu lives under Preferences in the top-right profile dropdown instead of a gear icon.

• Keyboard shortcuts let you delete or trim layers faster, which is handy when you’re removing the default outro clip.

• Export options show a larger preview window so you can double-check that no logo remains before you render the file.

‍

How to disable the default ending or watermark on pc

1. Open CapCut on your computer or browser

Sign in and select your project.

‍

2. Go to preferences

Click your profile avatar or the three-dot menu, then choose Preferences (desktop) or Settings (web).

‍

3. Turn off the default ending

In the Editing tab, toggle Add default ending to Off. This stops CapCut from inserting the branded outro in every new timeline.

‍

4. Check the timeline

Scrub through your layers to make sure no template or overlay with a CapCut logo remains.

‍

5. Upgrade to CapCut Pro if needed

If you still see a logo in the export preview, it likely comes from a template or a premium asset. Subscribing to CapCut Pro ensures access to watermark-free premium templates and effects. Standard exports without templates are already watermark-free.

‍

Steps to remove the CapCut watermark on the desktop

1. Launch CapCut desktop or web

Open the CapCut program on your computer or go to capCut.com and sign in.

‍

2. Disable the default ending

• Click the profile icon or gear icon in the top menu.

• Select Preferences or Settings.

• Toggle Default ending to Off.

‍

3. Inspect your timeline

Just as on mobile, look through all tracks for any overlay or logo from a template. Highlight and delete those layers if they appear.

‍

4. Choose export settings

Click Export, set the resolution and frame rate you prefer, and confirm that the preview shows no watermark.

‍

5. Optional Pro upgradation

If the preview shows a small logo in the corner, it usually comes from a template or premium asset. Subscribing to CapCut Pro unlocks watermark-free access to premium resources. Standard exports without templates are already watermark-free.

‍

How to remove the CapCut watermark from a video without pro

If you’re working on CapCut’s free plan, you can still finish a project without distracting branding. It takes a little extra effort, but you don’t need a subscription to produce a clean, polished video. Know the methods below;

‍

1. Trim the ending clip

Every new project includes a short "Default Ending." Slide to the very end of your timeline, tap the outro, and hit delete. It’s the fastest way to drop the most obvious CapCut branding.

‍

2. Crop or re-frame the footage

If a tiny logo sits in the corner of your export preview, open the Edit > Crop option. Adjust the frame just enough to cut out the watermark while keeping the subject centered. Take a moment to preview so you don’t accidentally crop a key visual.

‍

3. Add an overlay or sticker

Instead of leaving a blank corner, you can place your own graphic—like a channel logo, a lower-third title, or even a fun sticker—over the watermark. With a little creativity, it looks like part of your design rather than a cover-up.

‍

4. Turn off “add default ending” for future projects

In the settings gear (mobile) or Preferences menu (desktop/web), switch off Add default ending so you never have to delete it again. These are all free and available on both the mobile and desktop versions.

‍

Know the creative methods

Sometimes you need a more inventive solution:

• Pick templates without branding: When browsing community templates, check the preview carefully. Choose those labeled or demonstrated as watermark-free so you’re not cleaning up extra graphics later.

• Use design to your advantage: A lower-third banner or animated frame can hide the corner where the watermark sits. Viewers assume it’s a stylistic choice, not a patch.

• Finish the edit in another app: Export from CapCut and open the file in a free editor like DaVinci Resolve, Shotcut, or OpenShot. These programs let you crop with precision or mask the watermark with color-matched graphics for a seamless look.

‍

Things you cannot do without CapCut Pro

There are limits to the free route, and it’s better to know them upfront:

• No one-click removal: The small export logo in CapCut’s free plan can’t be disabled entirely inside the app unless you subscribe.

• Possible loss of quality: Cropping or repeated exporting may lower the resolution or change your framing.

• Copyright concerns: Erasing third-party template credits or using outside AI removers could violate CapCut’s terms or the template creator’s license.

‍

How to remove a watermark from a video in CapCut without blur

Blurring a watermark is the fastest fix, but it’s also the easiest one to spot. A hazy square floating in the corner of an otherwise sharp video draws the eye immediately. If you want your project to look polished, there are better ways to deal with that CapCut logo.

‍

Why blur is common but not ideal

People reach for the blur tool because it’s quick and free. In CapCut, you can drop a Gaussian-blur effect on the watermark and be done in seconds. 

‍

The trouble shows up when the video plays full-screen: that soft, fuzzy patch stands out against crisp footage, and because the blur sits in one spot, it can become more obvious when the rest of the footage moves or the camera pans. For content headed to YouTube, client work, or any professional setting, blur simply lowers the overall quality.

‍

How to avoid blur 

Know the following methods to remove blur; 

‍

Crop or trim the frame

Zoom in on the image or change the aspect ratio until the watermark area disappears. This works best when the logo sits near the edge of the shot and you can afford to lose a sliver of the background.

‍

Use overlays or matching graphics

Place a channel logo, lower-third banner, or decorative frame exactly over the watermark. When the graphic matches your color palette, viewers assume it’s part of the design.

‍

Content-Aware Fill or Background Clone

In advanced editors such as Adobe After Effects or DaVinci Resolve, you can sample nearby pixels and rebuild the hidden area. It takes longer and demands more processing power, but the result is clean and natural. These methods keep every frame sharp and free of the tell-tale blur.

‍

CapCut’s built-in tools to remove blur

CapCut itself offers a couple of handy tricks:

‍

Stickers and shape masks

Drop a sticker, emoji, or custom shape over the watermark. Adjust opacity or motion so it feels like an intentional design element rather than a cover-up.

‍

Adjust the layout

If you’re still editing and the logo sits near unused space, gently scale or reposition the video layer so the watermark falls outside the visible frame. 

‍

How to remove the CapCut watermark online- WatermarkRemover.io  

When you need to get a logo or timestamp off a video and don’t have time to wrestle with heavy software, WatermarkRemover.io is a straightforward place to start. It’s a web-based tool to remove video watermark, so you simply open a browser, drag in your clip, and let the site do the heavy lifting.

‍

Instead of forcing you to draw masks or key-frame each scene, the tool scans the video frame by frame, finds the watermark, and rebuilds the background on its own. Most short clips finish processing in a few minutes, and the final file downloads in the same format you uploaded—no complicated export settings required.

‍

Creators often use it when polishing social media reels or cleaning client footage on a tight deadline. You don’t need a subscription or special hardware; a stable internet connection and a modern browser are enough to produce a clean, watermark-free video that looks ready for sharing.  

‍

Step-by-step guide to using WatermarkRemover.io 

1. Pick a website

Start with a watermark removal service. Good choices include WatermarkRemover.io, which runs in a standard browser, so you won’t need to download a full video-editing program.

‍

2. Upload your clip

Open the site you’ve chosen and find the "Upload" or "Drag-and-Drop" area on the home page. Select the video from your computer or gallery.

‍

3. Highlight the watermark

Most online removers show a preview of the first frame. Use the built-in box or brush to mark the logo or text you want gone. Some AI tools understand the watermarked area and clean it automatically.

‍

4. Process and review

Click "remove" or "erase". The service scans every frame and fills in the background so the spot where the watermark sat blends with the rest of the footage. It includes a processing time of a few seconds to several minutes for longer videos.

‍

5. Save the video

When the final video looks good, select download to save it to your device and check how cleanly the watermark has been removed.  

‍

Final thoughts

Getting rid of a CapCut watermark isn’t one-size-fits-all. If you value speed and quality, upgrading to CapCut Pro is the cleanest option when you use premium templates or assets — exports remain watermark-free and every frame stays intact.

‍

Not everyone wants to pay for that, and that’s fine. The free version still gives you workable choices. You can turn off the Default Ending, crop the frame to hide the logo, trim a few seconds from the end, or drop a graphic over the corner so the mark disappears into your design. Desktop editors and a handful of reputable online tools add more options if you’re willing to spend a little extra time.

‍

For a polished result without heavy software, WatermarkRemover.io is a strong alternative. This browser-based tool uses AI to track and erase the watermark frame by frame, then lets you download a clean video in minutes. Always edit footage you own and stay within copyright rules.